Page 1 of 1
Couldn't create the PBUFFER - error message
Posted:
Sat Aug 13, 2005 12:12 pmby zielak
I have latest version of R4, radeon 9800SE@PRO with 128MB RAM
Athlon XP 3000+ and 1GB of system RAM
Sometimes when scenes are changing i get message: Couldn't create the PBUFFER, there is only OK button to press, and after that winamp and R4 close down
I could disable all fades that couse this problem, but I hope there is better solution.
Any ideas?
Posted:
Sat Aug 13, 2005 12:14 pmby rabidhamster
You turned on PBUFFERs in the R4 options i'd guess.
Turn them off and it should work fine.
Posted:
Sat Aug 13, 2005 1:37 pmby zielak
OMG!
that was a lame question after all
i can only defend mysefl that I never really was able to look in settings, becouse R4 was crashing down before I could do that
this time I was fast enought to disable PBUFFER and everything woks fine now
thx for the advice
Posted:
Mon Aug 15, 2005 9:55 amby Rovastar
Yeah also try lowering the buffer size and then turn pbuffer on. 512x512 is probably what you need for taht card.
Posted:
Mon Aug 15, 2005 10:36 amby andff
high!
John, can you explain what pbuffer is? when it turned off, will change of it's size affect on R4 output?
Posted:
Mon Aug 15, 2005 11:39 amby Rovastar
The buffer size will not effect the output of the screen res it is just the detail of the different 'layers' On settings, on screen display and turn a buffers to see what each on is.
Play with reducing teh bufferf size to see the effects. High more detail, lower less detail.
Pbuffer is just a method of storing the buffers. It is s a dedicated extension in OpenGL which should be quicker but sometimes it doesn't seem to make too much different.