Vidcap problems (v1.12)

Suggestions + Info on development of R4 visuals

Moderators: rabidhamster, Rovastar

Vidcap problems (v1.12)

Postby Guest » Mon Dec 27, 2004 9:32 pm

Hi@all

I've installed R4 1.12 to test the vidcap feauture using my ATI graphics card (ATI 9600). So I realized that vidcap isn't working with the video-in of my ATI card.
Then I used a simple TV Capture Card (PCI, Philipps Tuner). It worked, but the resolution of the video-in is very bad (320x240). The card is able to view the video-in using a resolution of 720x576. Is there a config file in which I can set the resolution R4 will use for the video input?

Greetz,

Msfuture...
Guest
 

Postby MsFuture » Mon Dec 27, 2004 9:34 pm

btw - it was me posting the last message... something must have gone wrong while posting it.... :D
MsFuture
 
Posts: 5
Joined: Sun Feb 01, 2004 4:01 pm

Postby rabidhamster » Tue Dec 28, 2004 5:45 pm

at the moment there isn't anything in r4 to let you set the video resolution. i'd suggest trying to run a video capture program before r4, and set the resolution in there - that may work.
rabidhamster
Site Admin
 
Posts: 1100
Joined: Fri Mar 21, 2003 12:31 pm
Location: Cambridge, England

Postby MsFuture » Tue Dec 28, 2004 6:48 pm

Hmm.... R4 keeps settings like that it should use the composite input and the PAL-B format. But the resolution seems not to be saved.

Another question, too:
has anyone got the video input of the ATI graphics card working?
MsFuture
 
Posts: 5
Joined: Sun Feb 01, 2004 4:01 pm


Return to R4

Who is online

Users browsing this forum: No registered users and 5 guests

cron